Excellence Synthetic Enamel Paint Suppliers & Manufacturers in India

 

Synthetic enamel paint is an oil-based paint with excellent adhesion properties. It comes in two finishes: glossy and matt, and it adheres to all primers. It can withstand repeated cleaning without losing its lustre. It can be used on both new and old surfaces, as well as on wood, steel, and walls. These Synthetic Enamels are made from synthetic resins and are commonly used to protect metal surfaces.

Zigma Paints with extensive range of Synthetic Enamel Paint, you can achieve the perfect finish and protection for your surfaces. We provide a diverse range of enamel paints in a variety of colours and smooth finishes. It is best suited for metal surfaces and comes in a variety of colours. When combined with economy paint products from Zigma Paints Pvt. Ltd., it provides a superior glossy finish for your interior and exterior surfaces. It produces a balanced composition with exceptional protection and decoration properties.

Surface Preparation for Synthetic Enamel Painting

Wood Work

·        The surface should be cleaned of dust, mortar droppings, and cement slurry splashes, among other things.

·        The woodwork that will be painted must be dry and free of moisture.

·        Sand paper should be used to smooth out any unevenness.

·        Any knots should be covered with putty of the same colour.

·        Before painting woodwork, a primer coat should be applied.

Iron and Steel Surface

•        Scraping should be used to remove all rust and scales.

•        The surface should be cleaned of dust, mortar, and rust, among other things.

•        A primer coat of good quality should be applied to the surface.

 

Enamel paints can be cleaned on a regular basis without losing their shine. It can also be fairly long-lasting and stain-resistant. Zigma Paints is engaged in manufacturing and providing Synthetic Enamel Paints to our clients, and we have distinct quality management systems. These paints are manufactured using basic chemicals and cutting-edge techniques in accordance with industrial standards. Synthetic Enamel Paint is available in a variety of colours and has an inherent corrosion resistance.

                                                                                                                                

Advantages of Synthetic Enamel Paint

·        Comes in a container and is ready to use.

·        It is tough, durable, and stain resistant, and it can withstand repeated cleaning without losing its brightness.

·        It is washable and has a higher washing capacity than plastic paint.

·        It flows well and has a long-lasting finish.

·        Used for both interior and exterior applications.

Zigma Paints Pvt. Ltd. always uses of world-class material and advanced tools and technology. We also manufacture wide variety of Enamel Paints like Industrial Synthetic Enamel Paint, Good Shine Synthetic Enamel Aluminium Paint, High Gloss Synthetic Enamel Paint, Synthetic Enamel Oil Based Paint, Auto Finish Enamel Paint, Furniture Enamel Paint are offered in diverse colors and having an inherent quality of corrosion resistance.

Visit us: - www.zigmapaints.com/synthetic-enamel-paint.php

Contact us: - (0253) 2381 429 / 660 2735

 

High Quality Polyurethane Thinner

 

What is Polyurethane?

Oil-based polyurethane is simply a type of varnish. Its common alkyd varnish made with some polyurethane thinners added. Alkyd is a resin that is found in nearly all varnishes and oil-based paints. The polyurethane resin gives the alkyd varnish scratch, heat, solvent, and water resistance. Polyurethanes are always two-part materials. They cure in a variety of ways: With the addition of moisture, with heat, or they are packaged as two separate components that cure after they are mixed.

Zigma Paints (P) Limited, are the professional and experienced manufacturers of PU Polyurethane thinner. It is assisted by a team of experienced professionals; we are involved in the manufacture and supply of high-quality polyurethane Base thinner. Thinners are water-white liquids that are used to thin PU-based paints. Our polyurethane thinner is created by skilled professionals using high-quality chemical compounds and cutting-edge technology. These polyurethane thinners are available in a variety of packaging options to meet the needs of the client.

Formulation Process of Polyurethane Thinner

Manufacturing process of polyurethane thinner is not very complicated. A usable and tried formulation, raw materials, and a mixing tank are required for production. You should investigate this formulation for raw materials to be used, quantities to be used, and ingredient usage rankings. Therefore, formulation and production methods of polyurethane thinner are important. If you have not a good formulation, you cannot make healthy and efficient production of any polyurethane thinner.

Features of PU Thinner:

·        Increase drying ability

·        Excellent corrosion inhibitor

·        Water resistance

·        Wide Range of Hardness

·        High Load Bearing Capacity

·        Abrasion & Impact Resistance

·        Performance in Harsh Environments

·        Color Ranges

Zigma Paints Pvt. Ltd. is catering to some of the top notch Industries in India by doing customization of Polyurethane Coatings and Paints as per clients need. Our exclusive Polyurethane PU Paints Thinner is also available to clients based on their specific requirements. We are the professional and experienced manufacturers, suppliers and service providers of world class Polyurethane PU Thinner.

Our Polyurethane Thinner is available in different colors, ratio & chemical constitutions which address the specific needs of the clients. With our Polyurethane Thinner, there is no need for getting through the costs of untimely repairing, which comes out to be quite expensive affair altogether.

If you are looking for Polyurethane thinner in India or chemicals pertaining to lab, laundry, general chemicals and water treatment etc. then Zigma Paints stands a good chance serve your requirements.

Visit us: - www.zigmapaints.com/pu-polyurethane-thinner-paint.php

Contact us: - (0253) 2381 429 / 660 2735

How Epoxy Paint Used in Industrial Surfaces?

 

Epoxy coating is a coating compound consisting of two distinct components: an epoxy resin and a polyamine hardener. When mixed, the resin and the hardener have a chemical reaction that creates a cross-linking of the elements as it cures. When the epoxy coating is fully cured, the resulting product is a durable, rigid plastic coating with a wide range of desirable mechanical properties. Zigma Paints Pvt. Ltd. is producing Epoxy Paint for all product categories.

Epoxy paint are known for their outstanding mechanical properties, such as hardness and durability, abrasion, impact and chemical resistance. These attributes make the epoxy paint an ideal protective coating material for components in demanding industrial settings. Epoxy surface paint protects surfaces, strengthens materials and protects them against corrosion and decay, making epoxy one of the most widely used industrial finishes.

As epoxy paint suppliers and manufacturers we understand a great product and enhances the position of our market through standardized, tailor-made and efficient solutions. The success of Epoxy Powder Paint by Zigma Paints Group is now enhanced by continuous innovations, better formulations, knowledge and advanced technology for the wide area of application.

Characteristics of true paint on floor:

·        Two-part product in which resin is mixed with hardener/activator

·        Will be labeled "100 percent solids"

·        Costs are typically $200 or more per kit

·        Often applied in conjunction with vinyl paint chips

·        Dries fully hard in no more than 24 hours

·        Extremely smelly to apply; adequate ventilation is a must

·        A very hard and long-lasting surface

 

Industrial floors made of concrete, even those made of hardening surfaces and mechanical smoothing, but especially those made of ordinary concrete or terrazzo, do not generally comply with the requirements set out above. The application of brushable epoxy paint, on concrete floors, successfully meets requirements for moderate mechanical and chemical strength and provides a good aesthetic finish.

It is a colored 2-component solvent-free epoxy system. Once it has hardened, it forms an easily cleaned final surface that displays great durability and strength against friction as well as resistance to chemical effects, e.g. to thin organic and inorganic acids, alkalis, petroleum products, wastes, water, sea water etc.

Epoxy paint for Walls - Safe & Clean Environment

An epoxy paints also applicable for walls as they are quick and simple to apply, and in no time create strong, hygienic, and easy to maintain surfaces that leave your space looking great. Particularly in situations where chemical resistance, light reflectivity and sanitation are important; epoxy wall is a perfect choice. It can prevent the growth of harmful bacteria and withstand moisture that leads to hazardous moisture. This is important in food preparation and handling areas, correctional facilities, locker rooms, hospital operating rooms, veterinary clinics and more.

Unlike high-performance epoxy paints walls coatings, are not formulated with the proper abrasion and chemical resistant polymers necessary to hold up over time. On the other hand, scratches, scrapes and other surface damage do not match the quality of the epoxy wall paint. Epoxy paint works for walls by eliminating seams and cracks that can harbour water and cause unsightly and unsafe damage. Our epoxy paints work particularly well over concrete walls, which are prone to cracks and easily show flaws and imperfections.

At Zigma Paints Pvt. Ltd., we use durable epoxy paint compounds to offer epoxy paint for flooring application services. If you are interested in know more about how our epoxy paint can create a durable and attractive flooring surface for your commercial or industrial facility, please feel free to contact our epoxy powder paint application company.

Visit us: - www.zigmapaints.com/epoxy-powder-coating-paint.php

Contact us: - (0253) 2381 429 / 660 2735

Looking to Paint For Acoustic Enclosure?

 

When it comes to choosing the best paint for acoustic enclosure, there’s nothing like doing some research and finding the most helpful and honest reviews on it.  Acoustic Enclosures are designed for DIESEL GENERATOR range from 10 to 2000 kVA. They control noise level upto 55dB(A). So it’s important when you apply a paint you have to consider that it permits moisture and air, as well as sound, to move more freely in a closed environment.

Zigma Paints Pvt. Ltd., almost highly recommends our powder coated Zigmacoat® paint finish on entire canopy. We feel that powder coating for acoustic enclosure is superior to paint and that it is the best choice in terms of price and quality. Because in this type of product Acoustic paints are norms for noise pollution. With this paint you can reduce conversation-level sounds coming through your acoustic enclosure.

 

Benefits of powder paint for acoustic enclosure

·        True eggshell sheen

·        Washable & oil/food/stain proof

·        Ideal for high-traffic residential & commercial areas

·        No VOCs or solvents, asthma-free & hypoallergenic

·        Superior coverage & excellent durability

·        Odorless, allowing for quick tenant turnaround

·        Naturally mold-resistant due to high pH content

·        Meets highest standards in Material Health with C2C

·        No ashing like other mineral based paints

·        Enhanced color, luminosity, depth and beauty

·        Allows for best indoor air quality with negligible TVOC

·        Recommended for use in homes, offices, hospitals & schools

 

Procedure of powder paint for Acoustic Enclosure

The first step in either painting process is to sandblasting the product after it has been finished. In projects that are being repainted, sandblasting is used to remove any old coatings still on the product. The medium used for sandblasting can range widely from biodegradable options such as walnut shells to produced steel grit. Sandblasting strips all surface oxidisation of steel so that it rusts within hours when exposed to the correct atmosphere. Keeping this in mind, it will be important for the product to remain in a dry environment after sandblasting.

The next step is to start applying the powder. The operator shall begin with a zinc-based primer applied by means of a special electrostatic or corona gun. First, the powder is physically attracted to the workpiece, so the spray is minimal. Second, if you try to apply a powder coat that is too thick in an area, the positive charge density will actually remove the powder and prevent it from being applied too thickly.

Once the powder is applied evenly to the workpiece, it is moved from the powder coating bay to the oven where it is heated to the primer gel. After the primer is heated or "freezed," it is moved back to the powder coating booth where the finish coat is applied. The final coat is usually a customer-driven colour and is applied in the same way as the primer. The last stage is to bake the product in the oven until it is completely cured and ready to go to the next stage of production.

We are having a large number of satisfied customers manufacturing acoustic enclosures. The paint for acoustic enclosure, which is placed in the exterior, must have a coating system with very good external durability. For this application we recommended our Zigmacoat® range of Pure Polyester (PP) & PU powder coatings.

Visit us: www.zigmapaints.com/powder-coating-for-acoustic-enclosure.php

Contact us: (0253) 2381 429 / 660 2735